EUTECH INSTRUMENTS CYBERCOMM 5000 FOR CYBERSCAN 5000 Manuál s instrukcemi stáhnout pdf (Strana 109)

Instruction Manual CyberScan PC5500/ 5000

104

The temperature coefficient is a value that reflects the degree to

which the sample’s conductivity is effected by temperature changes.

The meter will use the set temperature coefficient along with the

measured temperature provided by the ATC probe to calculate what

the conductivity would be at the selected reference temperature. If no

ATC probe is being used, the meter will use the set default

temperature in the calculation.

To Set Temperature Coefficient

1. Access the Set temperature Coefficient screen from the

conductivity Setup screen. The current Temperature Coefficient

is displayed on the screen.

2. Touch clear to delete the current temperature coefficient.

3. Touch C, F or K to select the desired temperature units for the

temperature coefficient.

4. Use the keypad to enter the desired temperature coefficient.

5. Touch enter to accept the temperature coefficient and return to

the conductivity Setup screen.

Touch exit to return to the Conductivity Setup screen, without

making any changes.

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 181 182

Žádné komentáře

EUTECH INSTRUMENTS CYBERCOMM 5000 FOR CYBERSCAN 5000 Manuál s instrukcemi Strana 109